Our Wonderful Followers who come back again and again to read about us...

Sunday, March 11, 2018

MOTORHOME MODIFICATIONS - *P* is Powered Windshield Shade (MCD) and Happy Anniversary

I am going to start off the new year with posting some of our motorhome modifications, a few at a time. I will post repairs, modifications, or neato things we have found for RVing.  I have lots of pics in my files so I will do them in alphabetical order.

Underneath that stuff, I will post my regular daily stuff..... kinda sorta fun, eh?

So here it goes, we are up to the letter P now!


MOTORHOME MODIFICATIONS 
STARTING WITH THE LETTER P


Powered Windshield Shade:
There is a line of powered window shades made by :    MCD Innovations   You can get either the solo shade, or a dual shade configuration with a day/night design of two layers.  We only wanted the solo shade in the heavy room darkening vinyl.  

It has always bugged me to see rumpled curtains drawn across the front of lovely sleek stylish motorhome. See what I mean, in the windshield of our rig?  And that is after hanging there a while.  They are worse when first unstrapped from being pulled back while driving.  See these wrinkly fabric curtains? 



We got ahold of a mis-ordered one from King's Campers in Wausau. It was in their clearance section because it was too wide for the person who ordered it. Our rig is called a "wide body" compared to many other motorhomes.  This MCD was being close-out priced at $85.00.  Regular price is $395.00 not including installation. We snapped it up! 

The first steps were to remove the old curtains and tracks.  Also we had to remove my slide out laptop desk, as it had to be relocated backward a few inches for the final drop area of the powered shade. We set it aside for a bit until we were done with the shade installation.



Next was to install the clips that hold the powered shade into place...  we had a great recessed area between the cabinets and the padded vinyl windshield surround on the inside.   When the shade is in it's fully UP position, you don't even see it. 



There... all snapped up into place.  

Next step is to run the power wire down the side post (hiding it behind the padding) to hook up to a hot line under the dash. Then he had to drill out a hole in the dash and mount a DPDT toggle switch.  This is just a momentary switch to power the shade either up or down by pushing on it.  It is a center OFF and momentary in either direction for the up and down wires.  We chose to install this kind of switch, so it will not to be left "on" where it will burn out the motor.  I was nervous about Steve drilling into the plastic dash, but it went well and he fished the wires down, around and into place. 


After a test--- it worked GREAT! 

We used the online directions to set the lowest and highest settings and the increments in between using the "learning mode" with a tiny pin that you use at the motor up in the corner of the roller. It was awkward reaching up in the corner of the window, over the steering wheel and the dash.  We finally got it all set up the way we wanted it. 

We repositioned the desk unit so the shade could drop fully down to the dash, by moving it about 2 inches towards the seat and over to the left a tiny bit so Steve could see out the lower portion of the side mirror.  My passenger seat is adjustable so it really didn't change the distance between my seat and the desk.  



My laptop with a GPS dongle, my tablet and my phone all sit inside of here.
 It all rolls out on a little tray when in use.



The shade can come down all of the way:



or just part way to use as a long sun-visor:

This is much nicer instead of the two small fold down visors that come standard on the rig.  How often does the sun go down and it just happens be positioned between those two small visors?  Then you have to lean over to drive--- at least until the sun either sets, or you turn a corner and drive in a different direction? LOL 


Soooo step one is done.  
The big MCD shade is in place and it functions. 

Now for the side windows---- 
I didn't want to have to pull those wrinkly curtains 
out even part-way to cover the side windows. 
I tore them OUT!   

Steveio thought:  What about installing regular room darkening window shades on each side window?   Off we went to town and picked up two heavy room darkening Levelor window blinds, 46 inches long. On sale, $10.00 each. 

We mounted in the hardware and hung the rollers.  It was a tight fit, and we had to remove the two curtain stuffing boxes on each side of the cockpit seats to install the rollers.  We don't need to stuff a curtain in them anymore, but we did have to reinstall those boxes because there were light fixtures mounted on them for the livingroom area.  If we took them off, the wall underneath was ugly and you could see those mounting holes.  

See? The curtains used to stuff between the white wall piece and the black window frame.  Now the side roller shades fit back into that same spaces. 



The front brackets of the roller shades butt up pretty close to the main cross large powered shade. It was a tight fit! But we wanted them as close as we could get.



Snugged up tight out of the way on each side of the motorhome.




Once the roller shades were up, I took a pic.  It's kinda showing a lot of light coming in the tiny gap between the side and front shades.  But it was a strange picture taking situation, with the dark interior the camera kept focusing on the light coming in the slits.  It really is very close, not a huge gap letting in light.  This was really dark inside, so I turned on the inside lights to snap the pic. 



The left side and right side:



P.S. ON EDIT
since those upper pics were taken, 
we cut down the tv cabinet, 
and made it flush
the other cabinets. 

We moved a flat screen tv to a bracket on the side wall instead.
No more "head banger cabinet" over the driver's seat. 



So the final result from the exterior is just what we were looking for.
No more wrinkly fabric curtains! 







~~~~~~~~

Lazy Sunday morning.  We made a leisurely breakfast and hung around the house doing a few little projects today.  This afternoon was still sunny but cold, so we took a walk for a couple miles with the dogs.  Most of the snow is melted again, but more is due tonight or tomorrow. They said maybe "flurries" so who knows?  The dogs enjoyed the outing, and we got some fresh air.  So glad I can walk a couple miles again, compared to January and February when I was down and out with pneumonia. 

The dogs were happy with Daylight Savings Time, because it meant that they got their food an hour EARLIER than usual.....  for some stupid reason I was thinking they would be fed an hour later. But no, that is in the fall when we "fall back" an hour.   

Image may contain: dog, cat and indoor



And I would like to close this off with a loving
  HAPPY ANNIVERSARY 
to my Mom and Lyle down in Florida!  
She said they celebrated with a day at the beach with a picnic lunch. 
Awwwww! 


It was one year ago today they said their vows to each other on the little dock on the pond in their backyard.  How adorable!  They are enjoying their senior years together and keep busy with the church, helping with the food pantry, and getting out and about and having some fun!


They are planning a road trip up to see us in early May,
so we are excited to see them again.  
Yapping online each day in our little facebook messenger chat is fun,
but it's good to see them in person soon! 



No comments:

Post a Comment

Thanks for taking the time to comment on my blog! I moderate all comments so it may take a little while for your comment to appear.